In the event you’re a PC gamer, you realize that your graphics card is likely one of the most essential elements in your system. It is accountable for rendering the photographs you see in your display, and a superb graphics card could make a giant distinction in your gaming expertise. However what occurs in case your graphics card begins to fail? Or if you wish to improve to a brand new mannequin? In that case, you will have to know the right way to take out your previous graphics card.
Eradicating a graphics card is a comparatively easy course of, however there are some things it is advisable do to ensure it goes easily. First, you will have to energy down your laptop and unplug it from the ability outlet. Then, open up your laptop case and find the graphics card. It is going to be an extended, slender card with a fan or warmth sink on it. As soon as you’ve got discovered the graphics card, you will have to take away the screws which can be holding it in place. Watch out to not lose these screws, as you will want them to reinstall the cardboard later.
As soon as the screws are eliminated, you’ll be able to gently pull the graphics card out of its slot. Watch out to not harm the cardboard or the slot. As soon as the cardboard is out, you’ll be able to disconnect the ability cables from it. Lastly, you’ll be able to take away the graphics card out of your laptop case. Now that you have eliminated your previous graphics card, you’ll be able to set up your new one. The method is actually the identical in reverse. First, insert the brand new card into the slot. Then, safe it with the screws. Lastly, join the ability cables to the cardboard. As soon as the cardboard is put in, you’ll be able to energy in your laptop and begin gaming.
[Image of a graphics card being removed from a computer case]
Disconnect Energy and Peripherals
Earlier than you begin, it is essential to take some security precautions to forestall any harm to your elements. First, be sure your laptop is turned off and unplugged from the ability outlet. Subsequent, floor your self by touching a metallic object, corresponding to a doorknob or water faucet. This can assist to discharge any static electrical energy that might harm your graphics card.
When you’re grounded, it is time to begin disconnecting the ability and peripherals out of your graphics card. To do that, comply with these steps:
- Find the ability connectors on the graphics card. They are going to be situated on the highest or facet of the cardboard, and they’re going to sometimes be both 6-pin or 8-pin connectors.
- Unplug the ability connectors from the graphics card. To do that, merely press down on the discharge latch on the connector and pull it straight out.
- Disconnect any peripherals which can be linked to the graphics card. This consists of any displays, HDMI cables, or different gadgets.
As soon as you’ve got disconnected the ability and peripherals out of your graphics card, you’ll be able to proceed to the following step of the elimination course of.
Take away Case Aspect Panel
Earlier than you start, be sure to energy down your laptop and unplug it from the ability outlet. Additionally, you will have to discharge any static electrical energy by touching a metallic object, corresponding to the pc case. Find the facet panel screws on the again of the case and take away them.
1. Determine the Aspect Panel
The facet panel is often product of metallic or plastic and is held in place by screws. Find the screws that maintain the facet panel in place. They’re normally situated on the again of the case.
2. Take away the Screws
Use a screwdriver to take away the screws that maintain the facet panel in place. Watch out to not drop the screws or lose them.
3. Elevate the Panel
As soon as the screws are eliminated, carry the facet panel up and away from the case. Watch out to not harm the panel or the elements contained in the case.
4. Slide the Panel Ahead
In some circumstances, it’s possible you’ll want to slip the facet panel ahead earlier than lifting it up. It is because the panel could also be held in place by a lip or groove on the entrance of the case.
5. Take away the Panel
As soon as the facet panel has been eliminated, you should have entry to the elements contained in the case. Now you can proceed with the remainder of the directions.
Find the Graphics Card
To start, it is advisable find the graphics card inside your laptop. Here is the right way to do it:
- Determine the growth slots: Open the pc case and find the growth slots on the motherboard. These slots are sometimes lengthy and skinny, with a plastic or metallic clip on the finish. You may normally discover them in the direction of the underside of the motherboard.
- Discover the graphics card slot: Among the many growth slots, you will see a slot that is wider and longer than the others. That is the slot for the graphics card.
- Find the graphics card: The graphics card is often the biggest and most noticeable element put in on this slot. It would have a big metallic heatsink and cooling followers on prime. It might even have a number of video outputs on the again of the pc, corresponding to HDMI or DisplayPort.
| Graphics Card Slot | Description |
|---|---|
| PCIe x16 | Commonest slot for contemporary graphics playing cards |
| AGP | Older slot used for graphics playing cards earlier than PCIe |
| PCI | Even older slot, not generally used for graphics playing cards |
Examine for the Launch Latch
The discharge latch is a small lever or button that secures the graphics card in its slot. It’s normally situated on the tip of the cardboard, close to the again of the pc case. To launch the latch, merely push down or pull it again. This can disengage the cardboard from the slot and mean you can take away it.
Sorts of Launch Latches
There are two important sorts of launch latches:
1. Push-down latch: Any such latch is launched by pushing down on the lever. It’s the commonest sort of launch latch discovered on graphics playing cards.
2. Pull-back latch: Any such latch is launched by pulling again on the lever. It’s much less frequent than the push-down latch.
You’ll be able to normally inform which kind of latch your graphics card has by wanting on the finish of the cardboard. If there’s a small button or lever that may be pushed down, then it’s a push-down latch. If there’s a lever that may be pulled again, then it’s a pull-back latch.
| Launch Latch Sort | Motion |
|---|---|
| Push-down latch | Push down on the lever |
| Pull-back latch | Pull again on the lever |
Rigorously Press Down on the Latch
Upon getting situated the latch, it is time to fastidiously press down on it. Here is a extra detailed information on how to do that:
-
Use your thumb to find the latch on the facet of the graphics card. It is normally a small, plastic lever that must be pushed down.
-
Gently apply downward strain to the latch. Don’t use extreme power, as this might harm the graphics card.
-
Maintain the latch down whilst you gently pull the graphics card out of the PCIe slot.
-
As soon as the graphics card is obvious of the slot, carry it up and out of the pc case.
-
Place the graphics card in an anti-static bag for safekeeping till you’re prepared to put in it in a brand new laptop.
Security Tip: All the time deal with graphics playing cards with care to keep away from damaging the fragile elements.
| Latch Location | Latch Motion |
|---|---|
| Aspect of graphics card | Push down |
| PCIe slot | Pull out |
Unplug Energy Cables
Earlier than you’ll be able to take away the graphics card, you will need to unplug the ability cables which can be linked to it. These cables are normally situated on the prime or facet of the cardboard. They’re sometimes black or blue in colour, and so they could have 6 or 8 pins. If it is advisable take out an 8 pin pcie energy cable, you will need to press a launch tab first, then disconnect the ability cable. If you wish to detach 6 pin pcie, you do not have to press any buttons – simply pull the cable firmly and the ability will probably be minimize off.
As soon as the ability cables are unplugged, you’ll be able to transfer on to the following step.
| Variety of Pins | Launch Tab |
|---|---|
| 8 | Sure |
| 6 | No |
Pull the Graphics Card Straight Up
As soon as the graphics card is disconnected, it needs to be lifted straight up and out of the growth slot. Use even strain on each side of the graphics card to keep away from bending or damaging it. It might be essential to wiggle the graphics card barely to loosen it earlier than pulling it straight up.
Watch out to not contact the gold contacts on the underside of the graphics card, as this might harm it. If the graphics card is caught, don’t power it. Attempt wiggling it gently to loosen it, and if that does not work, seek the advice of the motherboard guide or a professional technician for help.
As soon as the graphics card is eliminated, examine it for any harm. If there may be any harm, don’t set up the graphics card in one other laptop. Contact the producer of the graphics card for help.
Listed here are some further suggestions for pulling the graphics card straight up:
- Use a mushy material or anti-static mat to keep away from damaging the graphics card.
- Maintain the graphics card by the perimeters, not the center.
- Pull the graphics card straight up, don’t twist or bend it.
- If the graphics card is caught, don’t power it. Attempt wiggling it gently to loosen it.
- If you’re not sure the right way to take away the graphics card, seek the advice of the motherboard guide or a professional technician for help.
- Energy down your laptop and unplug it from the ability outlet.
- Open the case by eradicating the screws on the again.
- Find the graphics card. It is going to be an extended, skinny card with a fan on it.
- Disconnect the ability cables from the graphics card.
- Press down on the discharge tab on the finish of the graphics card slot.
- Pull the graphics card straight up and out of the slot.
- No show in your monitor
- Artifacts or different visible glitches in your display
- Your laptop freezing or crashing
| Step | Description |
|---|---|
| 1. | Disconnect the ability cables from the graphics card. |
| 2. | Find the discharge lever on the growth slot. |
| 3. | Press the discharge lever to unlock the graphics card. |
| 4. | Grasp the graphics card by the perimeters. |
| 5. | Pull the graphics card straight up and out of the growth slot. |
| 6. | Examine the graphics card for any harm. |
| 7. | If there may be any harm, don’t set up the graphics card in one other laptop. Contact the producer of the graphics card for help. |
Maintain the Graphics Card Securely
As soon as the cables are disconnected, firmly grasp the graphics card by its edges, being cautious to not contact the uncovered gold contacts on the PCIe connector or the backplate (if any).
Suggestions for Dealing with the Graphics Card:
| Suggestions |
|---|
| Keep away from touching the gold contacts on the PCIe connector. |
| Deal with the cardboard by the perimeters, not the center. |
| Watch out to not bend the cardboard. |
| If attainable, use an anti-static wrist strap. |
With the graphics card securely in hand, gently pull it straight up and out of the PCIe slot. Don’t apply extreme power or tilt the cardboard, as this might harm the slot or the PCIe connector on the graphics card itself.
Insert into New System (for Set up)
1. Open the case
Step one is to open the case of your laptop. That is normally achieved by eradicating the screws that maintain the facet panel in place. As soon as the facet panel is eliminated, you should have entry to the within of your laptop.
2. Find the PCIe slot
The following step is to find the PCIe slot in your motherboard. That is normally an extended, slender slot that’s situated close to the highest of the motherboard. The PCIe slot could have a small metallic latch on one finish.
3. Insert the graphics card
Upon getting situated the PCIe slot, you’ll be able to insert the graphics card. To do that, first align the graphics card with the slot. Then, press down on the graphics card till it clicks into place. The metallic latch will lock the graphics card in place.
4. Safe the graphics card
As soon as the graphics card is inserted, it is advisable safe it. That is normally achieved by screwing in two screws which can be situated on the again of the graphics card. These screws will assist to maintain the graphics card in place and stop it from coming free.
5. Shut the case
As soon as the graphics card is safe, you’ll be able to shut the case of your laptop. To do that, merely exchange the facet panel and screw it again into place.
6. Set up drivers
As soon as the graphics card is put in, it is advisable set up the drivers. The drivers are software program that permits your laptop to speak with the graphics card. You’ll be able to normally obtain the drivers from the web site of the graphics card producer.
7. Restart your laptop
As soon as the drivers are put in, it is advisable restart your laptop. This can permit the adjustments to take impact.
8. Check the graphics card
As soon as your laptop has restarted, you’ll be able to take a look at the graphics card. To do that, you’ll be able to run a graphics-intensive program or sport. If the graphics card is working correctly, you will notice a big enchancment in graphics high quality.
9. Troubleshooting
If you’re having issues together with your graphics card, there are some things you are able to do:
| Downside | Resolution |
|---|---|
| No show | Guarantee that the graphics card is correctly seated within the PCIe slot. Additionally, be sure that the ability provide is linked to the graphics card. |
| Poor efficiency | Guarantee that the drivers for the graphics card are put in. Additionally, attempt updating the BIOS of your motherboard. |
| Artifacts | Artifacts are visible distortions that may seem on the display when the graphics card just isn’t working correctly. In the event you see artifacts, attempt reseating the graphics card within the PCIe slot. |
Reinstall Aspect Panel and Energy On
10. **Reinstall the facet panel.**
As soon as the graphics card is securely in place, it is time to reinstall the facet panel. Guarantee that the facet panel is correctly aligned and that each one the screws are tightened securely.
11. **Energy on the pc.**
As soon as the facet panel is in place, you’ll be able to energy on the pc. The pc ought to now boot up usually and the brand new graphics card needs to be detected routinely.
12. **Examine the system supervisor.**
To confirm that the brand new graphics card is working correctly, you’ll be able to examine the system supervisor. In Home windows, you’ll be able to open the system supervisor by urgent the Home windows key + X and choosing “System Supervisor.” Within the system supervisor, broaden the “Show adapters” part and confirm that your new graphics card is listed.
13. **Set up the drivers.**
Upon getting verified that the brand new graphics card is working correctly, it is advisable set up the drivers. The drivers in your graphics card can normally be discovered on the producer’s web site. Obtain the drivers and set up them in keeping with the producer’s directions.
14. **Restart the pc.**
As soon as the drivers are put in, it is advisable restart the pc. The pc ought to now boot up usually and the brand new graphics card needs to be totally practical.
How To Take A Graphics Card Out
Taking out a graphics card could appear to be a frightening job, however it’s truly fairly easy. Listed here are the steps on the right way to do it:
