The Ego Power+ string trimmer is a powerful and versatile tool that can make quick work of even the toughest trimming jobs. Loading the trimmer with new line is a quick and easy process, and can be done in just a few minutes.
To load the trimmer, first remove the battery pack by pressing the release button and sliding it out of the trimmer. Then, grip the trimmer housing firmly with one hand and turn the trimmer head counterclockwise with the other hand. The trimmer head will detach from the housing, revealing the spool inside. Remove the old spool and discard it.
To insert the new spool, simply place it on the spindle inside the trimmer head. Then, turn the trimmer head clockwise to tighten it back onto the housing. Be sure to align the trimmer head with the slots in the housing. Finally, reinsert the battery pack and you’re ready to start trimming.
Identifying the Trimmer Head
Locate the trimmer head, which is the attachment at the end of the shaft that houses the cutting line. It’s typically made of plastic or metal and may have a cover or guard attached to it.
2. Types of Trimmer Heads
There are various types of trimmer heads available, each with its own design and features:
Automatic Line Feed Head
This type of head automatically advances the cutting line as it wears down. It typically has a button or lever that you press or pull to release a set amount of line. Automatic line feed heads are convenient and require less manual adjustment.
Bump Feed Head
A bump feed head releases the cutting line when the user taps the head on the ground or other surface. This design allows for quick and easy line advancement without having to stop and manually adjust it. Bump feed heads are often preferred for heavier-duty applications.
Manual Line Feed Head
Manual line feed heads require the user to manually advance the line by turning a knob or pressing a button. While not as convenient as automatic or bump feed heads, they provide greater control over the line length.
| Trimmer Head Type | Description |
|---|---|
| Automatic Line Feed | Automatically advances line with button or lever. |
| Bump Feed | Releases line when head is tapped on surface. |
| Manual Line Feed | Requires user to manually advance line. |
Loading the Trimming Line
1. Put on safety glasses to protect your eyes from flying debris.
2. Unplug the trimmer from the power source.
3. Turn the trimmer upside down.
4. Locate the line release cap on the bottom of the trimmer head. It is usually a small, round cap with a notch or slot in it. Insert a small screwdriver or other pointed object into the notch or slot and pry the cap off. Keep track of the cap as you will need it to secure the new line.
5. Pull out the old trimming line and discard it.
6. Cut a new piece of trimming line to the desired length. The length of the line will vary depending on the model of your trimmer. Consult your trimmer’s manual for the recommended length.
7. Insert the new trimming line into the hole in the center of the trimmer head. Make sure that the line is fully inserted and that it is not twisted or kinked.
8. Replace the line release cap and tighten it securely.
9. Plug the trimmer back into the power source and turn it on.
10. Press the trigger to wind the trimming line onto the spool. The line will automatically feed out as you trim.
Cutting the Trimming Line
Trimming line can be cut in a variety of ways, but the most common method is to use a pair of sharp scissors. To cut the trimming line:
- Hold the scissors perpendicular to the trimming line.
- Squeeze the scissors together to cut the trimming line.
- Pull the two ends of the trimming line apart to separate them.
When cutting the trimming line, it is important to be careful not to cut the trimmer cord. The trimmer cord is the electrical cord that powers the trimmer, and if it is cut, the trimmer will not work.
In addition to using scissors, you can also cut the trimming line using a utility knife or a pair of wire cutters. However, it is important to be careful when using these tools, as they can easily cut the trimmer cord.
If you are unsure how to cut the trimming line, you can consult the owner’s manual for your trimmer. The owner’s manual will provide specific instructions on how to cut the trimming line for your particular model of trimmer.
Other Methods of Cutting the Trimming Line
In addition to using scissors, you can also cut the trimming line using the following methods:
- Using a utility knife: To cut the trimming line using a utility knife, score the line around its circumference. Then, bend the line at the score mark and pull the two ends apart.
- Using wire cutters: To cut the trimming line using wire cutters, place the line in the jaws of the cutters and squeeze the handles together. The cutters will cut the line cleanly.
Safety Precautions
1. Wear Protective Gear
Always wear safety glasses, gloves, and hearing protection when using your Ego trimmer. This will help protect you from flying debris, burns, and noise.
2. Keep Children and Pets Away
Never operate your trimmer near children or pets. Keep them at least 50 feet away at all times.
3. Check the Trimmer Before Use
Before each use, inspect the trimmer for any damage or loose parts. If you find any damage, do not operate the trimmer. Have it repaired by a qualified technician.
4. Use the Right Line
Only use line that is specifically designed for your Ego trimmer. Using the wrong line could damage the trimmer or cause it to malfunction.
5. Trim in a Well-Ventilated Area
Never trim in enclosed areas or where there is poor ventilation. The fumes from the trimmer can be harmful if inhaled.
6. Avoid Overheating
Do not operate the trimmer for more than 30 minutes at a time. If the trimmer starts to overheat, stop using it and allow it to cool down for at least 15 minutes.
7. Never Touch the Trimmer Head
The trimmer head gets very hot during use. Never touch it with your bare hands.
8. Keep the Cord Clear of the Trimmer Head
Always keep the cord clear of the trimmer head to prevent it from getting cut or tangled.
9. Stop the Trimmer Before Making Adjustments
Always stop the trimmer and disconnect the power before making any adjustments or repairs. This will help prevent accidental injuries.
Ego Trimmer How To Load
The Ego Power+ string trimmer is a powerful and efficient tool that can make short work of even the toughest weeds. Loading the trimmer with new string is a quick and easy process that can be completed in just a few minutes. Here are the steps on how to load Ego trimmer:
- Unplug the trimmer from the power source.
- Open the trimmer head by pressing the release button.
- Remove the old string from the trimmer head.
- Cut a new piece of string to the desired length.
- Insert the new string into the trimmer head.
- Wind the string around the spool in a clockwise direction.
- Close the trimmer head.
- Plug the trimmer back into the power source.
Your Ego Power+ string trimmer is now ready to use!
People Also Ask About Ego Trimmer How To Load
How do I know when to replace the string on my Ego trimmer?
You should replace the string on your Ego trimmer when it becomes worn or frayed. If the string is too short, it will not be able to cut effectively. If the string is too long, it can become tangled and cause the trimmer to overheat.
What type of string should I use with my Ego trimmer?
You should use a 0.080-inch diameter string with your Ego trimmer. This is the recommended size for most Ego trimmers.
How often should I clean my Ego trimmer?
You should clean your Ego trimmer after each use. This will help to prevent the trimmer from becoming clogged with grass and debris. To clean the trimmer, simply use a damp cloth to wipe down the exterior of the trimmer. You can also use a brush to clean the trimmer head.
