Embark on a cleaning journey with the innovative Hoover Smartwash Plus, the epitome of effortless and thorough floor care. This remarkable machine seamlessly combines the power of vacuuming and mopping, transforming your home into a pristine haven. With its advanced features and intuitive design, the Hoover Smartwash Plus empowers you to achieve a sparkling clean, leaving your floors spotless and your home feeling revitalized.
Assembling the Hoover Smartwash Plus is a breeze. Simply attach the handle to the base and insert the brush roll and water tank. The intuitive design ensures a seamless setup, allowing you to start cleaning in no time. Before initiating the cleaning process, familiarize yourself with the control panel and ensure that the clean water tank is filled and the dirty water tank is empty. Engage the machine by pressing the power button and glide it effortlessly across your floors, leaving a trail of spotless surfaces in its wake.
The Hoover Smartwash Plus is equipped with an array of nozzles that spray a cleaning solution onto your floors. These nozzles effectively loosen dirt and grime, ensuring a deep clean. Simultaneously, the rotating brush roll agitates the solution and lifts away stubborn stains, revealing the pristine beauty beneath. The dirty water is then suctioned into the separate dirty water tank, ensuring that your floors are cleaned with fresh solution every time. The Hoover Smartwash Plus leaves your floors sparkling clean, free from lingering odors and residue, creating a refreshing and inviting atmosphere throughout your home.
Installing the Hoover Smartwash Plus
Getting your Hoover Smartwash Plus up and running is a simple process that can be completed in just a few steps. Here’s a detailed guide to help you install your new smart washer:
1. Unpack and Inspect the Washer
Carefully unpack your Hoover Smartwash Plus and inspect it for any damage or missing parts. Make sure all components are accounted for and in good condition before proceeding with the installation.
Unpacking Tips:
- Handle the washer with care, using two people if necessary.
- Remove all protective packaging materials.
- Inspect the exterior for any scratches or dents.
- Open the washer door and check the inside for any loose parts or damage.
- Unpack the accessory kit, which may include items such as a drain hose, water supply hoses, and detergent drawer.
| Item | Description |
|---|---|
| Water Supply Hoses | Usually color-coded blue for cold and red for hot water. |
| Drain Hose | Corrugated hose for draining wastewater. |
| Detergent Drawer | Removable drawer for adding laundry detergent. |
Filling the Solution Tank
To get started, you’ll need to fill up the solution tank. Here’s a step-by-step guide to make the process a breeze:
- Locate the solution tank on the machine. It’s usually a removable container located near the top.
- Unscrew the cap of the solution tank and fill it with a mixture of warm water and the recommended cleaning solution. Refer to the user manual for the specific ratio.
- Once filled, screw the cap back on tightly to prevent any leakage.
| Solution | Ratio (Water : Solution) |
|---|---|
| Hoover Smartwash Carpet Cleaner Solution | 1:10 |
| Hoover Smartwash Hard Floor Cleaner Solution | 1:4 |
With the solution tank filled, you’re now ready to tackle those stubborn stains and leave your carpets and hard floors sparkling clean.
Connecting the Hoover Smartwash Plus
To connect your Hoover Smartwash Plus to your Wi-Fi network and the Hoover app, follow these steps:
1. Download the Hoover App
Download the Hoover app from the Apple App Store or Google Play Store. Create an account or sign in if you already have one.
2. Turn On the Hoover Smartwash Plus
Plug in the Hoover Smartwash Plus and turn it on. Press and hold the Wi-Fi button on the unit for 3 seconds.
3. Connect to the Hoover Smartwash Plus Wi-Fi Network
On your mobile device, go to Wi-Fi settings and connect to the “Hoover_XXXX” network. The password is located on the sticker on the bottom of the Hoover Smartwash Plus.
Once connected, the Hoover Smartwash Plus will automatically connect to your Wi-Fi network.
**Troubleshooting Tips:**
| Problem | Solution |
|---|---|
| Cannot connect to the Hoover Smartwash Plus Wi-Fi network | Make sure the Wi-Fi button on the unit is pressed and held for 3 seconds. Make sure you are entering the correct password. |
| Cannot connect to the Hoover app | Make sure you have a strong Wi-Fi connection. Check if the Hoover Smartwash Plus is connected to your Wi-Fi network. |
Selecting the Cleaning Mode
Choosing the appropriate cleaning mode on your Hoover Smartwash Plus Carpet Cleaner is crucial to achieving the desired results. This section will guide you through the various cleaning modes and their specific applications to help you make an informed decision.
1. Express Clean Mode
Designed for quick and easy spot cleaning, the Express Clean Mode provides a powerful burst of cleaning action without requiring much water or detergent. This mode is ideal for removing spills and stains from carpets.
2. Deep Clean Mode
For deep-cleaning heavily soiled carpets, the Deep Clean Mode releases a large volume of hot, pressurized water and detergent into the carpet fibers. This mode agitates and extracts dirt, allergens, and pet hair, leaving your carpets thoroughly cleaned and refreshed.
3. Rinse Only Mode
The Rinse Only Mode is used to remove any remaining cleaning solution from carpets after using the Deep Clean or Express Clean Mode. It helps prevent soapy residue buildup and ensures that your carpets are left soft and fresh.
4. Specialty Cleaning Modes
In addition to the standard cleaning modes, the Hoover Smartwash Plus offers specialty cleaning modes tailored to specific cleaning needs:
| Cleaning Mode | Application |
|---|---|
| Pet Plus Mode | Effectively removes pet hair, stains, and odors from carpets and upholstery. |
| Hard Floor Mode | Safe for use on hard floors, such as tile, vinyl, and laminate, to remove dirt and grime. |
| Upholstery Tool Mode | Designed specifically for cleaning upholstered furniture, removing dirt, stains, and allergens. |
By selecting the appropriate cleaning mode, you can optimize the cleaning performance of your Hoover Smartwash Plus Carpet Cleaner and achieve the best possible results for your carpets and upholstery.
Using the Auto-Dry Function
The Auto-Dry function on the Hoover Smartwash Plus allows you to set a desired level of dryness for your clothes. Here are the steps on how to use it:
1. Load the Washer
Load your laundry into the washer, being mindful not to overload it.
2. Select the Cycle
Choose the appropriate wash cycle for your laundry type and fabric.
3. Adjust the Dryness Level
After selecting the cycle, you can adjust the dryness level using the Auto-Dry button. The dryer offers multiple levels of dryness, including Extra Dry, More Dry, Normal Dry, Less Dry, and Damp Dry.
4. Start the Cycle
Once you’ve set the desired dryness level, press the Start button to begin the wash and dry cycle.
5. Monitor the Drying Process
The washer will automatically dry your clothes to the selected level. You can monitor the drying progress through the washer’s digital display. The display will show the remaining drying time or the completion status.
| Dryness Level | Description |
|---|---|
| Extra Dry | Clothes are thoroughly dry and ready to iron. |
| More Dry | Clothes are mostly dry but may still be slightly damp to the touch. |
| Normal Dry | Clothes are ready to be folded or hung and can be worn without ironing. |
| Less Dry | Clothes are slightly damp and may need some air drying or ironing. |
| Damp Dry | Clothes are only partially dry and should be hung to finish drying. |
Emptying the Dirty Water Tank
Follow these steps to empty the dirty water tank of your Hoover Smartwash Plus:
1. Power Off and Unplug the Machine
Ensure the machine is turned off and unplugged from any power source.
2. Locate the Dirty Water Tank
Find the dirty water tank located on the back of the machine.
3. Remove the Tank
Grasp the handle on the dirty water tank and pull it straight out from the machine.
4. Carry Tank to Sink
Carry the dirty water tank to a nearby sink or drain.
5. Empty the Dirty Water
Hold the dirty water tank over the sink or drain and tip it to release the dirty water. Avoid spilling on yourself or other surfaces.
6. Rinse and Clean the Tank (Optional)
If desired, rinse the dirty water tank thoroughly with clean water to remove any remaining dirt or debris. Use a mild detergent or disinfectant if necessary. Allow the tank to dry completely before reattaching it.
7. Reinsert the Tank
Once the tank is empty and clean, insert it back into the machine by aligning it with the rails and pushing it gently until it clicks into place.
8. Dispose of Water
Dispose of the dirty water in an appropriate manner, such as pouring it down the sink or toilet.
Cleaning the Brush Roll and Filters
Removing the Brush Roll
Turn off the vacuum and unplug it from the outlet. Press the brush roll release latch and lift the brush roll out of the vacuum.
Cleaning the Brush Roll
Use scissors or a sharp knife to cut away any hair or debris wrapped around the brush roll.
Cleaning the Main Filter
Remove the main filter from the vacuum by pressing the release button. Rinse the filter under running water until the water runs clear.
Cleaning the Pre-Motor Filter
Remove the pre-motor filter from the vacuum by pressing the release button. Tap the filter against a trash can to remove loose debris.
Cleaning the HEPA Filter (Optional)
If your vacuum has a HEPA filter, it can be cleaned by vacuuming it with a hose attachment or using a soft brush.
Reassembling the Vacuum
Once the filters and brush roll are clean, reassemble the vacuum in reverse order of disassembly.
Cleaning Schedule
| Component | Cleaning Frequency |
|---|---|
| Brush Roll | Weekly |
| Main Filter | Monthly |
| Pre-Motor Filter | As needed |
| HEPA Filter | Every 6 months |
Troubleshooting Common Issues
1. No Water is Coming Out
Check if the water supply is turned on and that the hose is properly connected to both the faucet and the machine. Ensure that the water filter is clean and not clogged.
2. Water is Leaking
Inspect the hoses and connections for any leaks. Tighten any loose fittings. If leaks persist, contact customer support.
3. Machine is Not Cleaning Effectively
Check if the selected cleaning mode is appropriate for your carpet. Use a stronger setting for heavily soiled areas. Ensure that the machine is not overloaded and that the carpet fibers are not too long.
4. Brush Roll is Not Rotating
Turn off the machine and unplug it. Remove any obstructions or debris stuck in the brushroll housing. Check if the drive belt is intact and properly connected.
5. Machine is Making Strange Noises
Small noises are normal during operation. However, excessive or unusual noises may indicate a problem. Contact customer support for further assistance.
6. Machine is Not Spraying Solution
Make sure that the solution tank is filled and that the solution line is not clogged. Check if the nozzle is clear of debris and ensure that the appropriate solution setting is selected.
7. Machine is Not Drying
Allow sufficient time for the machine to dry the carpet. Vacuum the area thoroughly once dry. Use a fan or open windows to improve airflow and speed up drying.
8. Machine is Not Turning On
Check if the machine is plugged into a working outlet. Ensure that the power cord is not damaged. Reset the circuit breaker or fuse if necessary. If the machine still does not turn on, contact customer support.
9. Other Issues
Refer to the user manual for additional troubleshooting tips. If you encounter any persistent issues, do not hesitate to reach out to customer support for assistance.
Maintaining the Hoover Smartwash Plus
Maintaining your Hoover Smartwash Plus is essential to ensure optimal performance and longevity. Here are some key maintenance steps to follow:
1. Empty the Dirty Water Tank Regularly
After every use, empty the dirty water tank to prevent clogging and unpleasant odors.
2. Rinse the Clean Water Tank Monthly
Rinse the clean water tank monthly with water to remove any mineral deposits or soap residue.
3. Clean the Brush Roll
Remove the brush roll and clean any hair or debris from the brush roll and surrounding area.
4. Clean the Filter
Rinse the filter with water to remove dirt and debris, and replace it every 3-6 months.
5. Inspect the Floor Nozzles
Check the floor nozzles regularly for clogs or debris, and clear them if necessary.
6. Clean the Exterior
Use a damp cloth to wipe down the exterior of the Smartwash Plus, including the handle and buttons.
7. Store Properly
Store the Smartwash Plus upright in a dry place when not in use.
8. Troubleshooting Common Issues
Refer to the user manual for troubleshooting common issues, such as water leaks or power problems.
9. Annual Service
To ensure long-term performance and reliability, consider having the Smartwash Plus serviced by a qualified Hoover technician annually. This service may include a deep cleaning, component inspection, and lubrication.
Annual Service Checklist
| Component | Inspection/Service |
|---|---|
| Brush Roll | Clean and inspect for damage |
| Motor | Lubricate and inspect for wear |
| Pump | Inspect for leaks and proper operation |
| Water Tanks | Clean and inspect for damage |
| Hoses | Check for leaks or blockages |
Hoover Smartwash Plus: A Comprehensive Guide on How to Use
The Hoover Smartwash Plus is a technologically advanced carpet cleaner that combines the cleaning power of a traditional steam cleaner with the convenience of a smart vacuum. With its innovative features and user-friendly design, the Hoover Smartwash Plus has become a popular choice among homeowners seeking a deep and thorough carpet cleaning experience. In this guide, we will provide you with step-by-step instructions on how to use the Hoover Smartwash Plus effectively, ensuring optimal cleaning results and maintaining the longevity of your carpet.
Getting Started
Before using the Hoover Smartwash Plus, ensure that you have gathered the necessary accessories, which include the cleaning formula, a bucket for filling the solution tank, and the user manual for reference. Additionally, vacuum your carpet thoroughly to remove any loose dirt or debris.
Filling the Solution Tank
To fill the solution tank, open the lid located at the back of the machine and pour in the cleaning formula. Refer to the recommended dilution ratio provided by the manufacturer on the cleaning formula’s packaging. Fill the tank with warm water up to the fill line indicated on the tank.
Attaching the Cleaning Wand
Next, attach the cleaning wand to the machine by aligning it with the wand connection port and pressing it down firmly until it clicks into place. The cleaning wand houses the rotating brushes that agitate the carpet fibers during cleaning.
Carpet Cleaning Process
Once the solution tank is filled, and the cleaning wand is attached, you can begin the carpet cleaning process. Power on the machine using the power switch located on the handle of the wand. Guide the wand over the carpet, moving it back and forth in slow, overlapping strokes. The rotating brushes will agitate the carpet fibers, releasing dirt and debris.
People Also Ask About Hoover Smartwash Plus How To Use
How often should I use the Hoover Smartwash Plus?
The frequency of carpet cleaning using the Hoover Smartwash Plus depends on various factors such as the traffic and soil level in your home. As a general guideline, it is recommended to deep clean your carpets every 6-12 months to maintain their appearance and extend their lifespan.
What type of cleaning formula should I use with the Hoover Smartwash Plus?
Hoover recommends using their patented SmartWash solution specifically formulated for their Smartwash Plus carpet cleaner. This solution is designed to enhance cleaning performance and protect the machine’s components.
Can I use the Hoover Smartwash Plus on upholstery?
Yes, the Hoover Smartwash Plus can be used on upholstery with proper care and attention. Ensure you test a small inconspicuous area first to ensure colorfastness and avoid over-wetting the upholstery.
