Changing the rear brakes on a 2002 S55 AMG is a relatively simple task that can be completed in about an hour. It is important to change your brake pads regularly to ensure that your car is safe to drive. Worn brake pads can cause your car to take longer to stop, and they can also damage your rotors.
To change the rear brakes on a 2002 S55 AMG, you will need the following tools:
- 13mm socket
- 15mm socket
- 18mm socket
- Torque wrench
- Jack and jack stands
- New brake pads
- Brake cleaner
Once you have gathered your tools, you can begin the process of changing the rear brakes. Here are the steps you will need to follow:
- Park your car on a level surface and engage the parking brake.
- Loosen the lug nuts on the rear wheels, but do not remove them.
- Jack up the rear of the car and place jack stands under the designated jack points.
- Remove the lug nuts and take off the rear wheels.
- Use a 13mm socket to remove the caliper mounting bolts.
- Once the caliper mounting bolts are removed, you can carefully lift the caliper off of the rotor.
- Use a 15mm socket to remove the caliper carrier bolts.
- Once the caliper carrier bolts are removed, you can remove the caliper carrier.
- Use a brake cleaner to clean the caliper piston and the inside of the caliper carrier.
- Apply a thin layer of brake grease to the back of the new brake pads.
- Install the new brake pads into the caliper carrier.
- Reinstall the caliper carrier and tighten the caliper carrier bolts to 25 ft-lbs.
- Reinstall the caliper and tighten the caliper mounting bolts to 75 ft-lbs.
- Reinstall the rear wheels and tighten the lug nuts to 90 ft-lbs.
- Lower the car to the ground and remove the jack stands.
- Pump the brake pedal several times to seat the new brake pads.
You have now successfully changed the rear brakes on your 2002 S55 AMG. It is important to remember to change your brake pads regularly to ensure that your car is safe to drive.
1. Tools
In order to change the rear brakes on a 2002 S55 AMG, you will need a variety of tools. These tools include a 13mm socket, 15mm socket, 18mm socket, torque wrench, jack and jack stands, new brake pads, and brake cleaner.
- Sockets: The 13mm, 15mm, and 18mm sockets are used to remove the caliper mounting bolts, caliper carrier bolts, and lug nuts.
- Torque wrench: The torque wrench is used to tighten the caliper mounting bolts and caliper carrier bolts to the correct specifications.
- Jack and jack stands: The jack and jack stands are used to raise the rear of the car and support it while you are working on the brakes.
- New brake pads: The new brake pads are installed on the caliper carrier.
- Brake cleaner: The brake cleaner is used to clean the caliper piston and the inside of the caliper carrier.
Having the right tools for the job will make changing the rear brakes on your 2002 S55 AMG much easier and safer. By following the steps outlined in the article, you can ensure that your brakes are in good working condition and that your car is safe to drive.
2. Safety
Taking safety precautions is of utmost importance when performing any car maintenance, including changing the rear brakes on a 2002 S55 AMG. These precautions help minimize the risk of injury or damage to the vehicle.
- Parking on a level surface and engaging the parking brake: This prevents the car from rolling while it is jacked up.
- Loosening the lug nuts but not removing them: This makes it easier to remove the wheels once the car is jacked up.
- Jacking up the rear of the car and placing jack stands under the designated jack points: This raises the car and provides a stable base to work on.
By following these safety precautions, you can help ensure that the process of changing the rear brakes on your 2002 S55 AMG is safe and successful.
3. Replacement
The replacement process is a crucial component of “How To Change Rear Brakes On A 2002 S55 Amg”. It involves removing the existing brake pads and hardware, cleaning the caliper and carrier, and installing new brake pads and hardware. Each step plays a vital role in ensuring the proper functioning of the braking system.
- Removal of old brake pads and hardware: This step involves safely removing the old brake pads and any associated hardware, such as caliper mounting bolts and caliper carrier bolts. It is important to follow the proper procedures to avoid damaging the brake components or causing injury.
- Cleaning the caliper and carrier: Once the old brake pads and hardware have been removed, it is essential to thoroughly clean the caliper and carrier. This helps remove any dirt, debris, or brake fluid that may have accumulated over time, ensuring optimal performance of the new brake pads.
- Installation of new brake pads and hardware: After cleaning the caliper and carrier, new brake pads and hardware can be installed. It is important to use high-quality brake pads that meet the specifications of the vehicle and to follow the proper installation procedures. This ensures that the brake pads will function correctly and provide optimal braking performance.
By understanding the replacement process and its significance within “How To Change Rear Brakes On A 2002 S55 Amg”, individuals can gain valuable insights into the maintenance and repair of their vehicles’ braking systems.
FAQs on “How To Change Rear Brakes On A 2002 S55 Amg”
This section addresses frequently asked questions and misconceptions surrounding the process of changing rear brakes on a 2002 S55 AMG. Each question is answered concisely and informatively, providing valuable insights for those seeking to undertake this task.
Question 1: What are the essential tools required for this repair?
Answer: To effectively change the rear brakes on a 2002 S55 AMG, you will need a set of sockets (13mm, 15mm, and 18mm), a torque wrench, a jack and jack stands, new brake pads, and brake cleaner.
Question 2: Are there any specific safety measures I should observe during this process?
Answer: Safety should be prioritized throughout the repair. Park the vehicle on a level surface, engage the parking brake, loosen the lug nuts (without removing them), and securely lift the rear of the car using a jack and jack stands at the designated jack points.
Question 3: How do I remove the caliper and caliper carrier?
Answer: Once the wheels are removed, use a 13mm socket to remove the caliper mounting bolts, allowing you to carefully lift the caliper off the rotor. The caliper carrier can then be detached by removing its mounting bolts with a 15mm socket.
Question 4: How should I clean the caliper and caliper carrier before installing new brake pads?
Answer: Thoroughly clean the caliper piston and the interior of the caliper carrier using brake cleaner. This removes any dirt, debris, or brake fluid residue, ensuring optimal performance of the new brake pads.
Question 5: How do I properly install the new brake pads?
Answer: Apply a thin layer of brake grease to the backside of the new brake pads before positioning them into the caliper carrier. Ensure correct alignment and secure them by reinstalling the caliper carrier and caliper.
Question 6: What is the recommended torque for tightening the caliper mounting bolts and caliper carrier bolts?
Answer: Tighten the caliper mounting bolts to 75 ft-lbs and the caliper carrier bolts to 25 ft-lbs using a torque wrench. This ensures proper fitment and optimal braking performance.
By addressing these common concerns, this FAQ section enhances the understanding of rear brake replacement procedures for a 2002 S55 AMG, empowering individuals to confidently undertake this task.
Transition to the next article section: For further insights into the intricacies of changing rear brakes on a 2002 S55 AMG, refer to the comprehensive guide provided in the following section.
Tips
Changing the rear brakes on a 2002 S55 AMG is a relatively simple task that can be completed in about an hour. However, there are a few tips that can make the job easier and safer.
Tip 1: Use the correct tools. The right tools will make the job much easier and safer. You will need a 13mm socket, a 15mm socket, an 18mm socket, a torque wrench, a jack, and jack stands.
Tip 2: Follow the steps carefully. There are a few steps involved in changing the rear brakes. If you do not follow the steps carefully, you could damage your car or injure yourself.
Tip 3: Be safe. When working on your car, it is important to take safety precautions. Wear safety glasses and gloves, and be sure to jack up your car and support it with jack stands.
Tip 4: Clean the parts. Before you install the new brake pads, it is important to clean the caliper and the caliper carrier. This will help to ensure that the new brake pads will work properly.
Tip 5: Torque the bolts to the correct specifications. It is important to torque the caliper mounting bolts and the caliper carrier bolts to the correct specifications. If you do not torque the bolts to the correct specifications, the brakes could fail.
Tip 6: Bed the new brake pads. After you install the new brake pads, it is important to bed them in. This will help to ensure that the new brake pads will work properly.
By following these tips, you can change the rear brakes on your 2002 S55 AMG safely and easily.
Summary of key takeaways or benefits:
- Using the correct tools will make the job easier and safer.
- Following the steps carefully will help you avoid damaging your car or injuring yourself.
- Taking safety precautions is important when working on your car.
- Cleaning the parts will help to ensure that the new brake pads will work properly.
- Torquing the bolts to the correct specifications is important for the safety and performance of your brakes.
- Bedding in the new brake pads will help to ensure that they work properly.
Transition to the article’s conclusion:
Changing the rear brakes on a 2002 S55 AMG is a relatively simple task that can be completed in about an hour. By following these tips, you can ensure that the job is done safely and correctly.
Conclusion
By following the steps outlined in this article, you can safely and effectively change the rear brakes on your 2002 S55 AMG. This is a relatively simple task that can be completed in about an hour with the right tools and a little bit of know-how. By taking the time to do this yourself, you can save money and ensure that your car is safe to drive.
Remember, regular brake maintenance is essential for the safety of you and your passengers. By following the tips in this article, you can help keep your brakes in good working condition and avoid costly repairs down the road.
