Embark on a journey to restore the pristine luster of your prized WWE Shop Big Gold belt. Whether it’s weathered the storms of countless battles or simply succumbed to the passage of time, revitalizing its clear coat is a crucial step in preserving its legacy. With meticulous care, you can breathe new life into this iconic championship symbol, ensuring it continues to ignite excitement and awe for generations to come.
Before embarking on this delicate endeavor, gather the necessary supplies: sandpapers in varying grits, a polishing compound, a microfibre cloth, and a clear coat spray. Prepare your workspace with proper ventilation and protect the surrounding area from overspray. Patience and precision will be your guiding principles as you navigate the steps to bring your Big Gold belt back to its former glory.
Commence the restoration process by gently sanding the belt’s clear coat with a fine-grit sandpaper, approximately 400 or 600. Use light, circular motions, gradually moving to a finer grit until you reach 1200 or 1500. This meticulous sanding process smooths any imperfections or scratches, creating a flawless base for the new clear coat. Next, apply a polishing compound to a microfibre cloth and gently rub it into the belt’s surface in a circular motion. This step removes any remaining sanding marks and further refines the surface. With the preparatory steps complete, you are now ready to apply the clear coat.
Applying Primer
Priming the surface is a crucial step that enhances the adhesion of the clear coat and protects the base material from corrosion and wear. Primer acts as a bridge between the bare surface and the clear coat, promoting a strong and durable bond.
The choice of primer depends on the material and condition of the surface. For metal surfaces, a high-quality automotive primer is recommended. For plastic or composite materials, a specialized primer specifically designed for these surfaces is necessary.
Before applying the primer, thoroughly clean the surface to remove any dirt, oil, or other contaminants. Use a degreaser or a mild detergent and water solution to ensure proper adhesion. Sand the surface lightly using sandpaper with a grit of around 220 to create a slightly roughened surface that provides additional grip for the primer.
Applying the Primer
Using a paint sprayer, apply multiple thin coats of primer to the surface, allowing each coat to dry completely before applying the next. Hold the sprayer at a distance of 8-10 inches from the surface and move it evenly to avoid drips or streaks.
Allow the primer to dry overnight or according to the manufacturer’s instructions. The primer should be completely dry and hard before applying the clear coat.
| Step | Description |
|---|---|
| 1 | Clean and degrease the surface thoroughly. |
| 2 | Lightly sand the surface with 220-grit sandpaper. |
| 3 | Apply multiple thin coats of primer using a paint sprayer. |
| 4 | Allow each coat to dry completely before applying the next. |
| 5 | Let the primer dry overnight or as per manufacturer’s instructions. |
Polishing and Finishing
Step 7: Wet Sand with 1500-2000 Grit
Use 1500-2000 grit wet/dry sandpaper to remove any remaining scratches or imperfections. Wet the sandpaper and the surface of the belt and sand in a circular motion, applying moderate pressure. Rinse the surface frequently to remove debris.
Step 8: Dry Sand with 2500-3000 Grit
After wet sanding, switch to 2500-3000 grit dry sandpaper. This will further smooth the surface and prepare it for polishing. Sand in a circular motion, applying light pressure. Use a clean, dry cloth to wipe away any dust or debris.
| Step | Grit | Type |
|---|---|---|
| 7 | 1500-2000 | Wet |
| 8 | 2500-3000 | Dry |
Step 9: Polish
Apply a polishing compound to the surface of the belt using a foam polishing pad. Buff the surface in a circular motion using a polishing machine or hand polish. This will bring out the shine and remove any remaining swirls or imperfections.
Step 10: Protect
Once the belt is polished, apply a clear coat sealant to protect the finish from scratches and wear. Spray the sealant evenly over the surface and allow it to dry completely. This will help preserve the shine and durability of the belt for years to come.
How to Clear Coat WWE Shop Big Gold
The WWE Shop Big Gold Championship is a prestigious award given to the WWE Champion. The championship is made of gold-plated brass and features a large, ornate eagle perched atop a globe. The championship is often painted with a clear coat to protect it from wear and tear. To clear coat the WWE Shop Big Gold Championship, you will need the following supplies:
- Clear coat spray paint
- Sandpaper
- Soft cloth
- Masking tape
To clear coat the WWE Shop Big Gold Championship, follow these steps:
- Prepare the championship by sanding it lightly with sandpaper. This will help the clear coat adhere to the championship.
- Wipe the championship down with a soft cloth to remove any dust or debris.
- Mask off any areas of the championship that you do not want to be painted. This includes the eagle, the globe, and any other delicate areas.
- Apply a thin, even coat of clear coat spray paint to the championship. Allow the first coat to dry completely before applying a second coat.
- Once the second coat is dry, remove the masking tape and allow the championship to dry completely.
People Also Ask
How often should I clear coat my WWE Shop Big Gold Championship?
You should clear coat your WWE Shop Big Gold Championship every few months, or more often if it is exposed to a lot of wear and tear.
What type of clear coat should I use?
You should use a clear coat that is specifically designed for metal surfaces. This will help to protect the championship from corrosion.
Can I clear coat other WWE championship belts?
Yes, you can clear coat other WWE championship belts. However, you should be careful not to use too much clear coat, as this can make the belt look cloudy.
