The front partially spike hair is a hairstyle that is achieved by spiking the front section of the hair while leaving the back section down. This style can be created on any hair type, but it is most commonly seen on medium to long hair. There are several different ways to create a front partially spike hair, and the method you choose will depend on the desired look. If you are looking for a more casual look, you can simply use your fingers to spike the hair. For a more polished look, you can use a comb or brush to create more defined spikes. Additionally, you can use styling products such as gel or mousse to hold the spikes in place.
To create a front partially spike hair, you will need to start with clean, dry hair. Comb the hair to remove any tangles. Then, use your fingers or a comb to spike the front section of the hair. You can create as many or as few spikes as you like. Once you have created the spikes, use styling products to hold them in place. If you are using gel, apply it to your fingers and then run your fingers through the spikes. If you are using mousse, apply it to the roots of the hair and then comb it through to distribute the product evenly. Allow the styling products to dry completely before touching your hair.
Gather Essential Tools and Products
1. Hair Styling Tools
To achieve a front partially spike, you’ll need a few essential styling tools. These include:
- Hairdryer: This will be used to dry your hair and lock in the style.
- Round brush: This will help you create volume and shape in your hair.
- Rattail comb: This will be used to section your hair and create the spikes.
- Toothbrush: An old toothbrush can be useful for creating small, delicate spikes.
In addition to the styling tools, you will also need the following products:
- Hair gel: A strong-hold gel is essential for keeping the spikes in place.
- Hairspray: This will help to further secure the style and give it a shiny finish.
[subsection title]
[content]
Divide and Section the Hair
1. Determine the Spike’s Placement and Width
Establish the desired width and position of the spike on the front of your head. Mark this area with a comb or your fingers.
2. Section the Spike Area
Beginning at the hairline, use a comb to create a clean section along the width of the spike. Extend the section straight back from the hairline, maintaining the desired width. Secure the rest of the hair away from this section with clips or hair ties to prevent tangles.
**Advanced Technique: Create a Gradient Spike**
For a more subtle or gradual spike, divide the section into smaller, horizontal layers. The uppermost layer will be the thickest and tallest, while the lower layers will gradually decrease in size. This creates a tapered effect that blends into the rest of your hair.
3. Isolate the Fringe
If desired, you can isolate the remaining hair at the front of your head to create a contrasting fringe. Use a comb or your fingers to create a section along the hairline, separating it from the back hair. Secure the fringe with clips or hair ties.
Create the Base Layer
1. Wash and condition your hair. Towel dry it until it’s slightly damp.
2. Apply a styling product to your roots. This will help create volume and hold the spikes in place.
3. Blow-dry your hair on a medium heat setting, using a round brush to lift your roots.
Focus on the front section of your hair, where the spikes will be.
– Use your round brush to brush the hair upwards from the roots, applying heat from the blow-dryer to set the shape.
– Continue blow-drying and brushing until the front section is completely dry and volumized.
– Use a higher heat setting and smaller sections in the front to create more dramatic spikes.
– Let your hair cool completely before moving on to the next section.
Spike the Front Section
Section the front third of your hair. Start at the center of your hairline and use a comb to bring the hair forward. Gather it into a section, securing it with a hair tie or clip. This will be the section you spike.
Apply styling gel to the section. Use a dime-sized amount of gel and rub it between your palms to distribute it evenly. Use your hands to work the gel into the section, spreading it from root to tip. This will help create hold and shape.
Spike the hair upwards. Use your fingers to tease the hair upwards, creating spikes. Start at the roots and work your way to the tips. Use short, sharp movements to create spiky definition. You can adjust the height and shape of the spikes according to your preference.
Hold the spikes in place. Once you’ve created the desired spikes, use a small amount of hairspray to hold them in place. Spray the hairspray directly onto the spikes, focusing on the roots to ensure a strong hold. Avoid over-spraying, as this can weigh down the hair and make it look limp.
Use Products for Hold and Texture
Once your hair is dry, it’s time to add products to achieve the desired hold and texture. Start with a pre-styling product like a volumizing mousse or texturizing spray. Apply it to your roots and blow-dry your hair to lift them up and create volume.
Hairspray
Hairspray is a must-have for any spiked hairstyle. Choose a hairspray with strong hold to keep your spikes in place all day long. Spray it over your styled hair, focusing on the tips of your spikes.
Pomade
Pomade is another great option for adding hold and texture to your hair. It’s ideal for creating a more defined and sleek look. Apply a small amount of pomade to your fingers and run them through the tips of your spikes, twisting and shaping them as desired.
Gel
Gel can be used to achieve a wet or slick look. Apply a small amount of gel to your hands and distribute it evenly through your hair. Comb your hair into the desired shape and let it dry.
Wax
Wax is a good choice for creating a more matte and natural look. Apply a small amount of wax to your fingers and work it into the roots of your hair. Then, use your fingers to shape and separate your spikes.
Refine the Shape and Volume
Once you have established a basic shape, it’s time to refine it and add volume. This section will guide you through the following steps:
1. Define the Sides and Back
Using clippers or a razor, trim the hair on the sides and back to a shorter length than the spikes. This will create a contrast and enhance the height of the spikes.
2. Razor or Snip the Tips
To add texture and definition, use a razor or thinning shears to slightly razor over the tips of the spikes. This will remove some of the weight and create a more jagged, textured look.
3. Use Texturizing Products
Apply a texturizing gel or spray to the spikes to enhance their volume and hold. These products can add grit and lift, making the spikes appear thicker and more voluminous.
4. Create Layers
To add depth and movement, create layers within the spikes. Use a razor or scissors to cut shorter layers underneath the longer ones. This will give the spikes a more natural, flowing look.
5. Smooth the Transition
Blend the transition between the spikes and shorter hair on the sides and back. Use a razor or scissors to taper the hair gradually, creating a smooth and seamless transition.
6. Maintain the Volume
To maintain the volume and shape of the spikes, follow these tips:
| Tip | Description |
|---|---|
| Backcomb the Roots | Use a wide-toothed comb to gently backcomb the roots of the spikes, creating a base for volume. |
| Use a Volumizing Mousse | Apply a volumizing mousse to the roots of the spikes before blow-drying to enhance their lift. |
| Blow-Dry with a Round Brush | Use a round brush to blow-dry the spikes, lifting them at the roots and directing the airflow towards their tips. |
| Add Hairspray | Finish by applying a strong-hold hairspray to hold the spikes in place and prevent them from falling. |
Secure the Style with Spray
Once you’re satisfied with the shape and volume of your spikes, it’s time to lock them in place. Choose a strong-hold hairspray that provides a durable finish without weighing down your hair.
To ensure maximum hold, follow these steps:
1. Hold the hairspray can about 8-10 inches away from your hair.
2. Spray in short bursts, keeping the nozzle parallel to your hair.
3. Focus on the base and sides of the spikes, where they are most likely to fall out.
4. Avoid spraying directly on the tips of the spikes, as this can make them look greasy or limp.
5. Use a hairdryer on a low heat setting to dry the hairspray and further set the style.
6. If necessary, reapply hairspray throughout the day to maintain the hold and shape of your spikes.
| Tips for Choosing the Right Hairspray |
|---|
| • Strength of hold: Look for products with a “strong hold” or “maximum hold” label. |
| • Finish: Choose a hairspray that provides a matte or natural finish, rather than a shiny or wet look. |
| • Alcohol content: Avoid hairsprays with high alcohol content, as alcohol can be drying and damaging to hair. |
Maintain the Spike with Grooming
Preserving the perfect spike hair demands meticulous grooming habits. Here are some essential tips to maintain the style:
Daily Brushing
Regularly brush your hair with a fine-toothed comb to remove tangles and distribute natural oils, promoting shine and a healthy appearance.
Styling Products
Use styling products specifically designed for spiky hair, such as strong-hold gels or pomades. Apply a small amount to damp or dry hair and work through to create the desired shape and hold.
Avoid Overstyling
Excessive use of styling products can weigh down the hair and make the spikes appear dull. Stick to a small amount as needed to maintain the desired style without overdoing it.
Touch-Ups
Throughout the day, your spike may require touch-ups to maintain its shape. Use a hairspray or a spray bottle with water to refresh the hold and gently reshape the spikes as needed.
Weekly Wash and Condition
Regularly washing and conditioning your hair helps remove product buildup and maintain healthy hair. Use a shampoo and conditioner designed for your hair type to prevent dryness or damage.
Trimming
Regular trims help keep split ends in check and promote healthy hair growth. If you notice any breakage or uneven ends, schedule an appointment with a barber to trim the offending strands.
Protection from Heat
Heat from styling tools can damage hair and make it prone to breakage. Always use a heat protectant spray before using hot tools, such as a blow dryer or flat iron, and limit their use as much as possible.
Healthy Diet and Hydration
Maintaining a balanced diet and staying hydrated contributes to overall hair health. Ensure you’re consuming sufficient protein, vitamins, and minerals to support healthy hair growth and prevent hair loss.
Additional Tips for Better Hold
To ensure your front partially spiked hair stays in place all day long, follow these additional tips:
Use a Strong Hold Hairspray
Choose a hairspray with a firm or extra firm hold to keep your spikes in place. Apply it liberally to the spiked area, focusing on the roots and tips.
Use a Gel or Wax
Before blow-drying your hair, apply a small amount of gel or wax to the spiked area. This will provide extra hold and help define the spikes.
Section Your Hair
If you have thick or long hair, sectioning it into smaller sections will make it easier to spike. Pin up the rest of your hair to keep it out of the way while you work on each section.
Spike from the Roots
When spiking your hair, start at the roots and work your way up to the tips. This will create a more voluminous and defined look.
Use a Hairdryer
After you’ve applied gel or wax, use a hairdryer to blow-dry your hair on a low heat setting. This will help set the spikes and give them more hold.
Style with a Brush
Once your hair is dry, use a brush to style the spikes. Use firm, upward strokes to create the desired shape and definition.
Hairspray, Gel, and Wax Recommendations
| Product | Type | Strength |
|---|---|---|
| Axe Spiked Up Style Gel | Gel | Strong |
| Got2b Glued Blasting Freeze Spray | Hairspray | Extra Firm |
| American Crew Fiber | Wax | Medium |
Troubleshooting the Spike
1. The spike is not standing up straight.
This could be due to a few reasons. First, make sure that your hair is completely dry. If it is even slightly damp, the spike will not hold its shape. Second, check the product you are using to style the spike. Make sure it is a strong-hold gel or hairspray. Finally, try using a blow dryer to help set the spike in place.
2. The spike is too stiff.
If the spike is too stiff, it will look unnatural and uncomfortable. To soften the spike, try using a smaller amount of product or a product with a lower hold. You can also try blow drying the spike on a low heat setting to help soften it.
3. The spike is too messy.
If the spike is too messy, it will look unkempt and sloppy. To keep the spike neat and tidy, use a fine-toothed comb to groom it into place. You can also use a small amount of hairspray to help hold the spike in place.
4. The spike is too small.
If the spike is too small, it will not be noticeable. To make the spike more prominent, try using more product or a product with a stronger hold. You can also try blow drying the spike on a higher heat setting to help make it bigger.
5. The spike is too big.
If the spike is too big, it will look over-the-top and ridiculous. To reduce the size of the spike, use less product or a product with a lower hold. You can also try blow drying the spike on a lower heat setting to help make it smaller.
6. The spike is not in the right place.
If the spike is not in the right place, it will not look flattering. To position the spike correctly, use a comb to create a part in your hair where you want the spike to be. Then, gather the hair on top of the part and style it into a spike.
7. The spike is not the right shape.
If the spike is not the right shape, it will not look natural. To achieve the desired shape, use a comb or your fingers to mold the spike into place. You can also use a blow dryer to help set the shape of the spike.
8. The spike is not the right color.
If the spike is not the right color, it will not match your hair. To color the spike, use a hair dye or hairspray that matches your natural hair color. You can also use a temporary hair color spray to create a more dramatic look.
9. The spike is not lasting all day.
If the spike is not lasting all day, it may be due to the product you are using or the way you are styling it. Try using a stronger-hold product or blow drying the spike on a higher heat setting to help it last longer. You can also try using a hairspray to help hold the spike in place.
10. The spike is damaging my hair.
If the spike is damaging your hair, it may be due to the product you are using or the way you are styling it. Try using a product that is designed for your hair type and avoid blow drying the spike on a high heat setting. You can also try using a heat protectant spray to help protect your hair from damage.
How To Get A Front Partially Spike Hair
To get a front partially spike hair, you will need:
- Hairspray
- Pomade
- A comb
- A brush
- A blow dryer
Instructions:
1. Wash and dry your hair.
2. Apply a small amount of pomade to your hair and work it through from roots to tips.
3. Comb your hair back and create a part in the middle.
4. Using the blow dryer, dry your hair on a low heat setting and direct the airflow towards the back of your head.
5. Use the comb to tease the front of your hair up and back.
6. Apply a small amount of hairspray to the front of your hair and hold it in place for a few seconds.
7. Use the brush to smooth out the sides of your hair.
People Also Ask
Can I get a front partially spike hair if my hair is short?
Yes, you can get a front partially spike hair if your hair is short. However, the spikes will be shorter and less noticeable.
How long does a front partially spike hair last?
A front partially spike hair can last for several hours, depending on the type of hairspray you use and how much you apply.
What are some other ways to style a front partially spike hair?
You can style a front partially spike hair in many different ways. Some popular options include:
- Slicked back: Comb your hair back and apply a small amount of pomade to create a sleek, polished look.
- Tousled: Use your fingers to create a messy, textured look.
- Quiffed: Comb your hair up and back and use a blow dryer to create a voluminous, textured look.
