The American flag is a strong image of our nation’s values and beliefs. It’s a reminder of the sacrifices which were made to guard our freedoms and a beacon of hope for the long run. As such, it is very important show the flag with respect and in accordance with the Flag Code. A technique to do that is to hold the flag vertically.
There are a number of other ways to hold the flag vertically. A technique is to make use of a flagpole adapter. This machine matches onto the highest of a daily flagpole and permits you to dangle the flag vertically. One other solution to dangle the flag vertically is to make use of a wall-mounted flag bracket. This bracket is connected to the wall and has a hook or rod from which the flag will be hung.
Regardless of which methodology you select, make sure to comply with the Flag Code when hanging the flag vertically. The Flag Code states that the flag must be displayed with the union (the blue area with 50 stars) on the high and the stripes hanging down. The flag must also be flown at half-staff on Memorial Day and different days of mourning.
Vertical Flag Tips
When displaying the American flag vertically, it is necessary to stick to the next tips to make sure correct decorum:
-
Orientation:
The flag must be hung with the blue union (the sector of stars) on the high, and the pink and white stripes hanging vertically to the proper. If the flag is held on a wall, the union must be on the left aspect as considered from the entrance.
For a vertical show, the flag must be no less than so long as it’s broad, with a minimal width of 20 inches. If the flag is flown outdoors, it must be no less than 6 toes broad and 10 toes lengthy.
When hanging the flag vertically, it is necessary to make sure that the union is clearly seen and that the stripes circulation naturally in direction of the underside. Keep away from obscuring the flag with different objects or hanging it in a manner that distorts its form.
Deciding on the Correct Flag
Selecting the Appropriate Dimension
The vertical positioning of an American flag necessitates a special dimension than its horizontal counterpart. The ratio for a vertical flag must be 2:3, whereas the horizontal flag follows a ten:19 ratio.
Check with the desk under for particular measurements based mostly on the variety of stars:
| Variety of Stars | Peak (ft.) | Width (ft.) |
|---|---|---|
| 13 | 3 | 2 |
| 15 | 3.5 | 2.5 |
| 20 | 4 | 3 |
| 25 | 4.5 | 3.5 |
| 30 | 5 | 4 |
Materials Concerns
For a vertical flag meant for out of doors show, sturdy supplies like nylon or polyester are advisable. These materials can stand up to the weather and preserve their vibrant colours over time. For indoor use, a lighter materials like cotton will be appropriate.
Flag Orientation
When hanging a vertical American flag, make sure that it’s displayed with the celebs on the high and the stripes on the right-hand aspect (when going through the flag). That is the right orientation for a vertical flag, versus a horizontal flag the place the celebs are positioned within the higher left nook.
Measuring the Wall and Flag
Measuring the Wall
To make sure a exact and aesthetically pleasing show, it’s essential to measure the wall the place you propose to hold the flag. Use a measuring tape to find out its width and top, from the ground to the ceiling.
Measuring the Flag
Retrieve the American flag you intend to hold vertically and lay it out flat on a desk or different even floor. Measure the width (size of the stripes) and top (top of the blue area) of the flag utilizing a measuring tape.
Figuring out the Optimum Placement
To realize a balanced and visually interesting association, comply with these tips:
- Centering: Place the flag within the heart of the wall horizontally (centered between the left and proper edges) and vertically (centered between the ground and ceiling).
- Flag’s Peak vs. Wall’s Peak: The flag’s top must be roughly two-thirds to three-quarters of the wall’s top. This proportion creates a visually harmonious show.
- Star Area Placement: For a vertical show, the blue star area must be positioned on the higher proper nook of the flag when considered from the entrance. This orientation represents the place of the celebs within the evening sky.
- Adjusting for Non-Commonplace Wall Sizes: If the wall’s top or width is just not appropriate for a standard-sized flag, it’s possible you’ll must buy a custom-sized flag or regulate its placement accordingly.
Here’s a desk summarizing the advisable proportions for hanging a flag vertically:
| Wall Peak | Beneficial Flag Peak |
|---|---|
| 6-8 toes | 4-6 toes |
| 9-12 toes | 6-9 toes |
| Over 12 toes | Customized-sized flag advisable |
Figuring out the Peak and Width
To find out the suitable top and width for a vertically hung American flag, contemplate the next tips:
Flagpole Peak
The flagpole top must be no less than 1.5 occasions the flag’s top. For instance, a 3′ x 5′ flag would require a flagpole top of no less than 4.5′.
Flag Width
The flag’s width must be roughly 7/10 of its top. A 3′ x 5′ flag has a width of seven/10 x 3′ = 2.1′.
Flag Facet Ratio
The flag’s facet ratio (top to width ratio) must be 1.9:1. Because of this for each 1.9 inches of top, there must be 1 inch of width.
| Flag Dimensions | |
|---|---|
| Peak | Width |
| 3′ | 2.1′ |
| 4′ | 2.8′ |
| 5′ | 3.5′ |
Marking the Middle Level
To make sure the flag hangs appropriately and symmetrically, it’s essential to mark the middle level. Observe these steps to precisely find the middle:
1. Measure the Peak
Utilizing a measuring tape or ruler, decide the general top of the flag from high to backside.
2. Divide by Two
Divide the peak measurement by two to search out the midway level. This will provide you with the approximate location of the middle.
3. Mark the Again
Flip the flag over to the again aspect. Utilizing a cloth marker or chalk, mark the middle level on the again of the flag utilizing a straight line.
4. Create a Help
In case you are hanging the flag on a floor that doesn’t have a vertical help, resembling a wall, you’ll need to create a help rod. This could be a wood dowel, metallic rod, or another sturdy materials that may maintain the flag in place.
5. Grasp the Rod
Connect the help rod to the floor, guaranteeing that it’s stage. Align the rod with the middle line you marked on the again of the flag. The rod will act because the anchor level for hanging the flag vertically.
Utilizing String or Measuring Tape
Marking the Prime of the Flag
1. Lay the flag flat on a clear floor.
2. Fold the flag in half lengthwise, bringing the star area and stripes collectively.
3. Crease the middle fold from high to backside, securing it with binder clips or tape.
4. Unfold the flag, leaving the middle crease seen.
5. Discover the middle of the highest fringe of the flag by measuring it from both aspect.
6. Minimize a chunk of string or measuring tape to the size you need for the flag’s hanging top.
7. Fold the string or tape in half and mark the midpoint.
8. Place the midpoint of the string or tape on the heart of the highest fringe of the flag, aligning it with the middle crease.
9. Tape or clip the string or tape to the flag, leaving a loop on the high for hanging.
Securing the Flag
1. Tie a knot on the finish of the string or tape to create a loop.
2. Hook the loop onto a hook or nail pushed into the wall.
3. Modify the string or tape to make sure the flag hangs vertically and the stripes are parallel to the ground.
Hanging the Flag with Nails or Hooks
Hanging the American flag vertically requires particular measurements and strategies to make sure it’s displayed respectfully and correctly. When utilizing nails or hooks for vertical hanging, comply with these steps:
1. Decide the Middle of the Flag
Fold the flag in half lengthwise, then in half once more widthwise. The intersection of the folds marks the middle of the flag.
2. Mark the Wall
Measure the gap from the ceiling to the ground the place the flag ought to dangle. Divide this measurement by two and mark this level on the wall.
3. Discover the Flag’s Prime Edge
Measure the peak of the flag and subtract 2 inches. That is the gap from the highest of the pole to the highest of the flag.
4. Mark the Flag’s Prime Edge on the Wall
Measure down from the marked level on the wall by the peak calculated in step 3. That is the place the highest fringe of the flag must be hung.
5. Drive Nails or Insert Hooks
Drive two nails or insert two hooks into the wall, spaced evenly about 6 inches aside. The nails or hooks must be on the top marked in step 4.
6. Connect the Pole to the Nails or Hooks
Insert the flagpole into the rings or grommets on the highest fringe of the flag. Grasp the flag by looping the pole over the nails or hooks on the wall.
7. Place the Flag Accurately
Be certain that the celebs on the flag are going through the highest and that the blue area is on the left aspect of the observer. The stripes ought to dangle vertically and be parallel to the wall.
| Star Area | Stripe Area |
|---|---|
| Prime | Backside |
| Left | Proper |
Extra Ideas for Stability
8. Safe the Rope to the Pole Utilizing a Knot
There are numerous various kinds of knots that can be utilized to safe a rope to a pole. Nonetheless, not all knots are created equal. When selecting a knot, it is very important contemplate the next components:
- The power of the knot: The knot ought to be capable to stand up to the pressure of the wind and the burden of the flag.
- The convenience of tying the knot: The knot must be straightforward to tie, even in robust winds.
- The sturdiness of the knot: The knot ought to be capable to stand up to the weather and repeated use.
Based mostly on these components, there are three knots which might be generally used to safe a rope to a pole:
- The clove hitch: The clove hitch is an easy and safe knot that’s straightforward to tie. It’s generally used to safe a ship to a dock or to tie a rope to a tree.
- The sq. lashing: The sq. lashing is a powerful and sturdy knot that’s very best for securing a rope to a pole. It’s generally used to construct buildings resembling bridges and fences.
- The taut-line hitch: The taut-line hitch is a flexible knot that can be utilized to safe a rope to a pole or to regulate the strain of a rope. It’s generally used to tie down a tent or to safe a load to a truck.
After getting chosen a knot, comply with these steps to safe the rope to the pole:
- Move the rope across the pole and produce the ends collectively.
- Tie the knot in response to the directions.
- Pull on each ends of the rope to tighten the knot.
- Trim any extra rope.
Hanging the Flag in Out of doors Areas
When displaying the American flag vertically, it must be oriented in order that the blue area with the celebs is on the left and the stripes are on the proper from the viewer’s perspective. This orientation ensures that the Union (blue area) is within the appropriate place of honor.
Flagpole Show
- The flag must be flown from a flagpole that’s tall sufficient for the flag to fly freely with out touching the bottom or another objects.
- The flagpole must be sturdy sufficient to face up to the wind and climate situations.
- The flag must be raised and lowered in a dignified method.
- The flag must be flown throughout the day, from dawn to sundown, except it’s illuminated at evening.
Wall Show
- The flag must be displayed on a wall or different vertical floor.
- The flag must be hung in order that the blue area with the celebs is on the high.
- The flag must be taut and wrinkle-free.
- The flag shouldn’t be displayed in a manner that it may very well be broken or dirty.
Different Concerns
- The American flag ought to by no means be flown the other way up besides as a misery sign.
- The American flag shouldn’t be flown in inclement climate, resembling throughout a storm.
- The American flag must be disposed of correctly when it turns into worn or torn.
| Beneficial Flagpole Heights |
|---|
| 15 toes for a 3’x5′ flag |
| 20 toes for a 4’x6′ flag |
| 25 toes for a 5’x8′ flag |
Respecting the American Flag
1. It must be displayed ready of honor.
This implies it must be positioned on the right-hand aspect of different flags, or above them if they’re hung vertically.
2. No different flag ought to fly increased than the American flag.
If there may be one other flag flown, it must be positioned on the left or on the similar stage.
3. The flag shouldn’t contact the bottom.
If it does, it must be cleaned or changed instantly.
4. The flag shouldn’t be used as clothes or for another function.
It ought to solely be used for ceremonial or ornamental functions.
5. The flag must be handled with respect.
This implies not folding it up haphazardly or utilizing it as a doormat.
6. The flag must be correctly folded when not in use.
As stipulated by the flag code, the flag is to be folded within the following method:
- Fold the flag lengthwise, bringing the striped finish to the highest and the blue area to the underside.
- Fold the flag in half widthwise, bringing the striped finish to the blue area.
- Tuck the underside nook of the flag up and over the blue area, making a triangle.
- Proceed folding the flag on this method till it’s fully folded.
7. The flag must be flown at half-mast on sure events.
To point out respect, the flag must be flown at half-mast after the loss of life of a president, vp, or different high-ranking official. It must also be flown at half-mast on Memorial Day, and on Peace Officers Memorial Day.
8. The flag must be displayed always of day.
The flag shouldn’t solely be displayed throughout the day, it may also be displayed at evening, but it surely have to be illuminated.
9. The flag must be correctly saved when not in use.
One of the simplest ways to retailer the flag is in a dry, darkish, and funky place. It must also be positioned in a container that can shield it from mud and moisture.
10. The flag must be changed when it’s worn or torn.
To point out respect, the flag shouldn’t be displayed whether it is worn or torn. The next are some particular guidelines for when to switch the flag:
| Situation | When to Change |
|---|---|
| Fading or fraying | When the colours begin to fade or the material begins to fray |
| Tearing | When there’s a tear or gap within the material |
| Soiling | When the flag is soiled or stained |
How To Grasp American Flag Vertically
The American flag is a logo of our nation and our freedom. It must be handled with respect and displayed in a correct method. When hanging the flag vertically, there are some things to remember.
First, the flag must be hung with the blue area on the left and the white stripes on the proper. The celebs must be on the high of the flag and the stripes must be hanging down. The flag must be hung at a top the place it will likely be seen to all who move by.
In case you are hanging the flag from a wall, you need to use a flagpole or different acceptable help. The flag must be hung from the highest of the workers, and it must be taut sufficient in order that it’s not wrinkled or sagging.
In case you are hanging the flag from a flagpole, you need to be sure that the flagpole is sturdy sufficient to help the burden of the flag. The flag must be raised to the highest of the pole, and it must be secured with a rope or clasp.
Individuals Additionally Ask
Which Facet of the Flag Faces Out When Displayed Vertically?
When the American flag is displayed vertically, the blue area with the celebs must be positioned on the left aspect of the flag and the white stripes must be on the proper aspect.
How Excessive Ought to I Grasp the Flag When Displayed Vertically?
When the American flag is displayed vertically, it must be hung at a top the place it will likely be seen to all who move by.
Can I Grasp the Flag from My Home or House?
Sure, you may dangle the American flag from your own home or house. Nonetheless, you need to be sure that the flag is displayed in a respectful method and that it’s not broken or desecrated.
