Putting on a lens keeper is a simple but important step in the process of wearing contact lenses. This device helps to keep your lenses clean and protected when they are not in use. By following a few simple steps, you can ensure that your lens keepers are put on correctly and that your contact lenses are safe and comfortable to wear.
The first step is to wash your hands thoroughly with soap and water. This will help to prevent any bacteria or dirt from getting on your lenses or lens keepers. Once your hands are clean, open the lens keeper and fill it with fresh contact lens solution. Make sure to fill the keeper to the fill line, but do not overfill it. Then, place your contact lens in the keeper, making sure that it is completely submerged in the solution. Close the keeper tightly and shake it gently to mix the solution and to ensure that the lens is clean. Repeat this process for the other contact lens.
Once your contact lenses are in the lens keepers, you can store them in a cool, dry place. Do not store them in the refrigerator, as this can damage the lenses. When you are ready to wear your contact lenses, simply remove them from the lens keepers and rinse them with fresh contact lens solution. Then, insert the lenses into your eyes. By following these simple steps, you can help to ensure that your contact lenses are clean and safe to wear.
Gathering Essential Materials
Before you begin the process of putting on Lens Keeper, it is crucial to gather all the necessary materials. These materials will ensure that you have a smooth and comfortable experience. Here’s what you’ll need:
Materials List
Here is a comprehensive list of essential materials:
1. Lens Keeper device: This is the primary device that will help you insert and remove your contact lenses. It’s a small, handheld device with two soft, flexible cups.
a.Ensure that the Lens Keeper is clean and free of any debris or damage.
b.Inspect the cups for any tears or irregularities.
c.If the Lens Keeper has not been used for an extended period, consider soaking it in a contact lens cleaning solution for disinfection.
d.Rinse the Lens Keeper thoroughly with sterile water before use.
2.Contact lenses: These are the corrective lenses that you will be inserting into your eyes.
3.Contact lens solution: This solution is used to clean and store your contact lenses. Make sure to use a solution that is recommended for your specific type of contact lenses.
4.Mirror: A mirror will help you see what you’re doing when inserting and removing your contact lenses.
5.Tissue or towel: This will be used to dry your hands before handling your contact lenses.
Aligning the Lenses
Aligning the lenses correctly is crucial for optimal lens performance and comfortable wear. Follow these steps to ensure proper alignment:
1. Read the Lens Orientation Instructions
Consult the packaging or instructions provided with your lens keeper to determine the proper orientation of the lenses.
2. Place the Lenses in Their Designated Slots
The lens keeper typically has two slots, one for each lens. Gently place each lens in the corresponding slot, ensuring they are facing the correct direction.
3. Check the Alignment Markers
Most lens keepers have alignment markers or indents that indicate the correct position for the lenses. Align the lenses with these markers to ensure they are properly seated.
4. Double-Check the Alignment
Once the lenses are in place, gently tap the lens keeper to settle them. Inspect the lenses again to ensure they are correctly aligned. If any lens appears misaligned, carefully adjust it while simultaneously holding down the opposite lens.
| Troubleshooting Alignment Issues | Solutions |
|---|---|
| Lenses are not sitting flush | Ensure the lenses are properly aligned with the markers. Gently tap the lens keeper to settle them further. |
| Lenses are tilted | Reposition the lenses by carefully lifting one edge and adjusting it while holding down the opposite lens. |
| Lenses are overlapping | Remove the lenses and reinsert them one at a time, ensuring they are facing the correct direction. |
Securing the Lid
Successfully securing the lid is crucial for ensuring a proper seal and preventing moisture or debris from entering the lens keeper. Follow these detailed steps to complete this task effectively:
1. Align the Lid Properly
Ensure that the lid is positioned correctly over the base of the lens keeper. It should fit snugly into place with no gaps or misalignments.
2. Rotate the Lid Clockwise
Once the lid is properly aligned, begin rotating it clockwise. Apply gentle but firm pressure to secure the lid. You may feel a slight resistance as it tightens.
3. Continue Rotating Until Resistance
Continue rotating the lid until you feel a noticeable resistance. This indicates that the lid has been fully tightened and secured.
4. Check for Tightness
To ensure a secure fit, try to pull the lid off the base. If it remains fixed, the lid is adequately secured.
5. Wipe Off Excess Moisture
After securing the lid, use a clean cloth or tissue to wipe away any excess moisture or residue from the lid and base. This helps prevent moisture from entering the lens keeper.
6. Optional: Additional Securing Methods
For added security, consider employing these optional methods:
| Method | Steps |
|---|---|
| Tape | Wrap a small piece of tape around the lid and base to reinforce the seal. |
| Elastic Band | Wrap an elastic band around the lid and base to maintain a secure fit. |
| Shrink Wrap | Use shrink wrap to cover the entire lens keeper, ensuring a tight seal and protecting the lenses from moisture. |
Troubleshooting Common Issues
When inserting your lens into the Lens Keeper, you may encounter some common issues. Here are some solutions:
1. Lens is not fitting properly
Carefully adjust the lens until it sits snugly in the designated spot.
2. Lens is not visible
Ensure that the lens is facing the correct way. Flip it over if necessary.
3. Lid is not closing
Make sure that the lid is aligned correctly and is not obstructed by any debris.
4. Lens is falling out
The lens may not be seated properly. Remove and reinsert it, making sure to apply gentle pressure.
5. Lid is too tight
Apply slight pressure on both sides of the lid to release it. Be careful not to use excessive force.
6. Lens is scratched
Avoid touching the lens directly with your fingers. Use a soft cloth or lens cleaning kit to clean it gently.
7. Lens is dirty
Use a lens cleaning solution or wipes to remove any dirt or debris.
8. Lens is cracked or damaged
If the lens is severely damaged, discontinue use and consult with an eye care professional.
9. Lens is not popping up
Ensure that you are pressing the release button firmly. If the lens still does not pop up, gently tap the Lens Keeper on a flat surface to dislodge it. Alternatively, you can use a small object like a toothpick to gently pry the lens out.
| Troubleshooting Steps | Possible Solutions |
|---|---|
| – Press the release button firmly | – The lens should pop up |
| – Tap the Lens Keeper on a flat surface | – This may dislodge the lens |
| – Use a small object to gently pry the lens out | – Be careful not to damage the lens |
How To Put On Lens Keeper
Inserting contact lenses can be a daunting task, but it becomes even more challenging when you have to use a lens keeper. A lens keeper is a small, round device that helps to keep your contact lenses in place. It can be made of a variety of materials, including silicone, hydrogel, and PMMA. Lens keepers are available in different sizes and shapes to accommodate different types of contact lenses.
To put on a lens keeper, first wash your hands thoroughly. Then, rinse the lens keeper with saline solution. Next, place the lens keeper on your finger, and then place the contact lens on top of the lens keeper. Finally, gently insert the lens keeper into your eye. The lens keeper will help to keep the contact lens in place, and it will also protect the contact lens from damage.
People Also Ask About How To Put On Lens Keeper
How do I choose the right lens keeper?
The best lens keeper for you will depend on the type of contact lenses you wear. If you wear soft contact lenses, you will need a lens keeper that is made of a soft material, such as silicone or hydrogel. If you wear hard contact lenses, you will need a lens keeper that is made of a more durable material, such as PMMA.
How often should I clean my lens keeper?
You should clean your lens keeper every day. This will help to prevent the build-up of bacteria and other contaminants.
Can I sleep with my lens keeper in?
No, you should not sleep with your lens keeper in. This can increase your risk of developing an eye infection.
