Wrapping presents can be a tedious task, but it doesn’t have to be. With a few simple steps, you can wrap any round present perfectly. Whether you’re a seasoned gift wrapper or a complete novice, these instructions will help you achieve professional-looking results.
First, you’ll need to gather your supplies. You’ll need wrapping paper, scissors, tape, and a ribbon (optional). Once you have your supplies, you can start wrapping. Place the present in the center of the wrapping paper and fold the paper up around the present. Make sure the paper is tight, but not so tight that it tears. Secure the paper with tape. Next, fold the sides of the paper down and secure them with tape. Finally, fold the top and bottom of the paper down and secure them with tape.
If you want to add a ribbon, now is the time to do it. Cut a piece of ribbon to the desired length and tie it around the present. You can also add a bow if you like. And that’s it! You’ve now wrapped a round present perfectly.
Preparing the Materials
Gathering Essential Materials
To expertly wrap a round present, it is crucial to assemble the necessary materials. Begin by acquiring wrapping paper that is proportional to the size of the present. Avoid using paper that is too small or too large, as this can result in unsightly creases or excessive waste.
Selecting Suitable Scissors
Next, choose the appropriate scissors for the task. Sharp, pointed scissors are ideal for precise cutting. Avoid using blunt or dull scissors, as they will tear the wrapping paper and make it difficult to create clean edges.
Securing with Tape
High-quality tape is essential for securely holding the wrapping paper in place. Opt for clear or double-sided tape, which provides an invisible finish. Avoid using masking tape or painter’s tape, as these adhesives may leave unsightly residue on the paper.
Preparing the Platform
Prepare a clean and flat surface to serve as the wrapping platform. This will provide a stable base for wrapping and prevent creases or wrinkles. Consider using a table, countertop, or any other surface that offers ample space.
Additional Considerations
In addition to the essential materials, consider gathering decorative items to enhance the presentation of the gift. Ribbons, bows, or embellishments can add a touch of elegance and personalization to the wrapped present.
| Material | Purpose |
|---|---|
| Wrapping paper | Covering the present |
| Scissors | Cutting the paper |
| Tape | Securing the paper |
| Platform | Providing a stable base |
| Decorative items | Enhancing the presentation |
Measuring and Cutting the Wrapping Paper
Getting the Perfect Size
To determine the correct amount of wrapping paper, measure around the circumference of the round present twice, including some extra overlap. Add the diameter of the present to one of the circumference measurements to get the length of paper needed. For the width, measure twice the height or radius of the present, plus some extra.
Precise Cutting Technique
-
Lay out the paper: Unroll the wrapping paper and place the present in the center.
-
Mark the edges: Use a pencil or measuring tape to mark the edges of the paper where it overlaps by about 2-3 inches.
-
Cut around the present: Carefully cut along the marked lines, ensuring a smooth and accurate cut.
-
Fold the overlap: Bring the overlapping edges together and fold them over each other to create a neat seam.
-
Secure the folds: Use tape or glue to secure the folded edges and ensure the wrapping paper stays in place.
Folding the Paper
Begin by placing the round present in the center of the wrapping paper. Fold one edge of the paper up over the bottom of the present, creating a triangle. Repeat with the opposite side, meeting the first triangle at the top. Press down along the seams to secure.
Securing the Ends
To keep the paper securely in place, use ribbon or twine to tie it around the center of the present. Make a double knot and trim any excess. Alternatively, you can use a clear tape dispenser to run a strip of tape along the seams, reinforcing the paper.
Step-by-Step Guide to Folding the Sides
- Gather the Paper: Spread out the wrapping paper on a flat surface and place the round present in the middle.
- Fold the Bottom: Bring one edge of the paper up over the bottom of the gift to form a sharp angle or fold. Smooth down the paper to create a clean crease.
- Fold the Top: Repeat step 2 with the opposite edge of the paper, folding it over the gift to meet the bottom fold at a point. Press down on the crease to secure.
- Secure the Sides: Gather the extra paper on each side of the gift and tuck it inward, creating pleats or folds. Use tape or glue to secure the pleats for a neat and polished look.
- Finishing Touches: Trim any excess paper around the edges for a clean appearance. Add embellishments such as ribbons, bows, or tags to enhance the presentation.
Hiding the Overlap with a Diagonal Fold
To hide the overlap on the sides of your gift, use a diagonal fold. This technique is simple yet elegant and adds a touch of sophistication to your gift wrapping.
Step 1: Create an Overlap
Lay the wrapping paper on a flat surface and place the gift in the center. Fold the left and right sides of the paper over the gift, overlapping them slightly in the middle.
Step 2: Find the Center
Hold one of the overlapping sides and locate the center point on the fold. Fold the corner of the paper at this point towards the opposite side, creating a diagonal line.
Step 3: Repeat on the Other Side
Repeat step 2 with the overlapping side on the other end of the gift. Ensure that the diagonal folds intersect in the middle.
Step 4: Secure with Tape
| Option 1: Clear Tape | Use clear tape to secure the diagonal folds along the edges. Place the tape on the underside of the paper, keeping the folds as flat as possible. |
|---|---|
| Option 2: Decorative Tape | For a more decorative touch, use decorative tape to hold the folds in place. Experiment with different colors and patterns to complement the wrapping paper. |
Step 5: Finish Touches
Smooth out any wrinkles or creases on the wrapping paper. Add a ribbon or bow to complete the look. This technique not only hides the overlap but also creates a unique and stylish presentation for your gift.
Taping the Sides
Taking the longest piece of tape, you will want to secure the overlapping edge of the paper to the box. This should be done on both sides of the present, being sure to press firmly to ensure a secure hold.
Next, you will want to cut four to five equal lengths of tape, approximately six inches in length. These pieces of tape will be used to secure the sides of the present by taping the overlapping paper to the box.
Starting with one side, take a piece of tape and fold one end about an inch over onto itself to create a tab. This tab will be used to hold the tape in place once it is applied to the box.
With the tab created, place the tape along the edge of the overlapping paper, ensuring that the tab is on the inside of the box. Press firmly to secure the tape to the box.
Repeat these steps with the remaining pieces of tape, spacing them evenly along the side of the present. Once all the tape is applied, smooth out any wrinkles or creases in the paper to give the present a clean and polished look.
Tip:
| For larger or heavier presents, you may want to use wider tape or apply more pieces of tape to ensure a secure hold. |
Creating a Tucked Corner
To create a tucked corner, follow these steps:
- Place the paper on the floor with the design side facing down. The present should be on top of the paper.
- Fold up the bottom edge of the paper to meet the present’s base.
- Fold the sides of the paper inward to meet the folded edge from step 2.
- Secure the sides of the paper with tape.
- Bring up the bottom corners of the paper and fold them over the top of the present.
- **Tuck the corners into the sides of the paper:** To do this, first, fold the left corner of the paper over to the center. Then, tuck the right corner into the left corner. Finally, fold the right corner over the left corner again to secure it.
- Repeat the tucking process with the remaining corner.
- Secure the top of the paper with tape.
Tucking the corners |
To tuck the corners, begin by folding the left corner of the paper over to the center. Then, tuck the right corner into the left corner. Finally, fold the right corner over the left corner again to secure it. |
Finishing the gift wrap |
Once the corners are tucked, secure the top of the paper with tape. Your gift is now wrapped! |
Folding the Paper over the Gift
7. Pull the Paper Across the Gift:**
- Hold the paper in place with one hand and pull the opposite edge across the gift.
- Align the edge of the paper with the center of the gift and ensure it is taut.
- Bring the paper over the top of the gift, leaving an equal amount of overhang on both sides.
| Step | Description |
|---|---|
| 7a | Pull paper across the gift from the opposite edge. |
| 7b | Align paper’s edge with gift’s center and keep it taut. |
| 7c | Bring paper over the gift’s top, ensuring equal overhangs. |
Tying a Ribbon or Bow
Once your present is wrapped, it’s time to add a festive touch with a ribbon or bow. Here are step-by-step instructions for both options:
Ribbon
- Cut a length of ribbon about twice the width of your present.
- Center the ribbon over the top of the present, with equal lengths hanging down on either side.
- Cross the right-hand tail over the left-hand tail and form a loop.
- Bring the left-hand tail up through the loop.
- Tighten the knot by pulling both tails at once.
Bow
- Cut two pieces of ribbon of equal length.
- Lay the ribbons in a criss-cross pattern on a flat surface.
- Tie a simple knot in the center of the ribbons.
- Fold each ribbon end in half and make a loop.
- Cross the right-hand loop over the left-hand loop and tuck it through the back.
- Cross the left-hand loop over the right-hand loop and tuck it through the back.
- Tighten all the loops to form a symmetrical bow.
- Trim the ribbon ends as desired.
| Ribbon | Bow |
|---|---|
| Simple and quick | More intricate and decorative |
| Can be tied with one hand | Requires two hands |
| Suitable for small or large presents | Better suited for larger presents |
How To Wrap A Round Present
Adding Personalized Touches
9. Adding Ribbons and Bows
Ribbons and bows can give your wrapped gift a touch of elegance and sophistication. Here’s how to add them:
- Choose a ribbon: Select a ribbon that complements the wrapping paper and the gift recipient’s taste. Consider both the width and texture of the ribbon.
- Measure and cut: Measure the circumference of the gift and cut the ribbon to twice that length. This will allow you to create a double bow.
- Attach the ribbon: Wrap the ribbon around the center of the gift, crossing the ends over each other at the top.
- Create a bow: Make two loops with the excess ribbon, one on each side, and bring them together to form a bow. Secure the bow with a piece of tape or a wire.
- Customize with charms or ornaments: For a more personalized touch, add charms, ornaments, or even small gift tags to the bow.
- Gift
- Wrapping paper
- Scissors
- Tape
- Lay the paper on a flat surface.
- Center the gift on the paper and measure 2-3 inches on all sides.
- Mark the measurements and cut the paper.
- Fold one corner of the paper over the gift, making a crease.
- Fold the other three corners over in the same way.
- Tape the corners down, ensuring they are tight.
- Fold the excess paper up to form a flap.
- Wrap the paper around the gift, keeping it taut.
- Overlap the edges by 1-2 inches and tape them down.
- Fold the sides of the paper over the ends of the gift.
- Crease and tape them down.
- Add a ribbon or bow for decoration.
- Trim any excess paper.
Gathering Your Materials
Measuring and Cutting the Paper
Folding the Corners
Securing the Corners
Wrapping Around
Folding the Sides
Finishing Touches
Tips for a Flawless Wrap
1. Use the correct paper size: Measure the gift and add 2-3 inches on all sides for easy wrapping.
2. Fold neatly: Ensure the creases are sharp and the edges aligned for a polished look.
3. Tighten the wrap: Keep the wrapping paper taut when you fold it over to avoid wrinkles.
4. Secure the tape: Use enough tape to hold the corners and sides securely but avoid over-taping.
5. Flatten the edges: Crease the edges sharply with your fingernails or a ruler for a professional finish.
6. Trim excess paper: Remove any uneven or excess paper for a clean appearance.
7. Decorate sparingly: Use ribbon or bows sparingly to avoid cluttering the wrap.
| Tips for Selecting Gift Wrap |
|---|
| Choose high-quality paper that is thick and durable. |
| Consider the style of the gift when choosing the paper pattern. |
| Use bright and festive colors for birthdays and holidays. |
| Consider subtle, elegant patterns for formal occasions. |
| Match the size of the paper to the gift. |
How To Wrap A Round Present
Round presents can be a bit tricky to wrap, but with the right technique, you can get them looking neat and tidy in no time. Here are the steps you need to follow:
1.
Place the present in the center of a large piece of wrapping paper. Make sure the paper is big enough to wrap around the present completely, with a little bit of overhang on all sides.
2.
Bring the two long sides of the paper up and over the present, and meet them in the middle. Crease the paper along the edges of the present to form a sharp crease.
3.
Fold down the top flap of paper over the crease you just made. Smooth out the paper and make sure there are no wrinkles or creases.
4.
Repeat step 3 with the bottom flap of paper.
5.
Now it’s time to wrap the ends of the present. Fold the right end of the paper over the present, and crease it along the edge. Repeat with the left end.
6.
Finally, fold up the corners of the paper at the ends of the present to create a neat finish. You can use tape or glue to secure the corners if you want.
People Also Ask About How To Wrap A Round Present
How do you wrap a large round present?
To wrap a large round present, you will need to use a large piece of wrapping paper. Follow the steps outlined above, but be sure to use a piece of paper that is large enough to wrap around the present completely.
How do you wrap a round present without tape?
You can wrap a round present without tape by using double-sided tape or glue. Apply the double-sided tape or glue to the edges of the paper, and then press the paper together to seal it.
What is the best way to wrap a round present?
The best way to wrap a round present is to use the steps outlined above. This method will give you a neat and tidy finished product.
